WindowsSection 5: Setting Up - Windows AXIS 5600 User’s Manual66Windows 3.1 and Windows for WorkgroupsWindows 3.1 In order to print to a network printer, Windows 3.1 requires theinstallation of network support, such as the LAN Server or LANManager Workstation software. When installed, proceed as describedunder Windows for Workgroups below.Windows forWorkgroupsPeer-to-Peer Printing Follow the instructions below to install your AXIS 5600 for peer-to-peer printing at a Windows for Workgroups workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add.3. In the NPS Port list, select the AXIS 5600 port. The ports appearas .LP1, .LP2, and .CM1, where is AX followed by the last six digits of the AXIS 5600 serialnumber, e.g. AX100086.4. Accept or change the suggested Windows port name and type anyrequired comment in the Description field. Make a note of theWindows port name as you will need this later, then click OK toinstall the Windows port.5. In the Port menu, click Connect... to bring up the WindowsPrinters dialog.6. Select a printer driver from the list of Installed Printers (or clickAdd>> to install a new driver), then click Connect...7. Select the Windows port name from step 4 above (this name canbe found at the bottom of the Ports list).8. Click OK to close the Connect dialog, and Close to close Printers.The setup is completed and you can now print through yourAXIS 5600.
