Axis 5600 User Manual

Also see for 5600+: Specification User guide Installation guide User guide User manual

Contents

Axis 5600 User Manual Manual pdf 60 page image

WindowsAXIS 5600 User’s Manual Section 5: Setting Up - Windows 59Windows NT 3.5xInstalling TCP/IPPrinters inWindows NT 3.5xInstall the AXIS Print Monitor software on your Windows NT3.5xclient, if you have not already done so. AXIS Print Monitor can bedownloaded from the AXIS Online CD or from the Axis WWWhome page at http://www.axis.com/.To be able to print using LPR, you must have installed the AXIS 5600in the TCP/IP environment as described inAssigning an IP address, on page 25 and the TCP/IP protocol must beenabled on your client.1. Open the Print Manager and select Create Printer from thePrinter menu.2. Enter an appropriate name in the Printer Name field.3. Choose an appropriate printer driver for your printer from thedrop-down Driver list. If the desired printer driver already appearsin the displayed Manufacturers and Printer Models list dialog,proceed directly to step 6. It is only necessary to perform steps 4 -5 if your printer does not appear in the model list.Note: ❏ Even if the desired printer is available in the Manufacturers andPrinter Models list, you are advised to use the printer driverprovided with your printer. This assures you of the latest driversoftware.4. Select Other... in the driver list. Insert the printer driverdiskette/CD that was provided with your printer, select thediskette/CD drive and click OK.5. Select the printer driver you want to install.6. Select Other... from the “Print to” drop-down list.7. Select AXIS Port from the list of available Print Monitors in thePrint Destination dialog. Click OK.8. Select LPR (TCP/IP) as your choice of network protocol andclick OK.