UNIXSection 8: Setting Up - UNIX AXIS 5600 User’s Manual82Section 8 Setting Up - UNIXInstallation in the UNIX EnvironmentHaving performed the basic TCP/IP setup procedures as defined inAssigning an IP address, on page 25 and onwards, you are now able toprint in interactive mode using LPR, FTP or Reverse Telnet protocols.However, should you require to integrate the AXIS 5600 into yourhost spooler, you can use the Axis automatic installation scriptaxinstall. This utility software is resident on the AXIS 5600 and can bedownloaded to your host using FTP, so no disks are required. Theaxinstall script can also be downloaded from the Axis WWW homepage at http://www.axis.com/ and it is available on the AXIS OnlineCD.Having completed this operation, the printer connected to the AXIS5600 will appear as though they are directly connected to the hostprinter spooler.If you intend to operate your AXIS 5600 in a multiprotocolenvironment, you should also proceed according to one or more of thefollowing sections, as appropriate to your network.Section 4 Setting Up - NetWare, on page 34Section 5 Setting Up - Windows, on page 44Section 6 Setting Up - OS/2, on page 70Section 7 Setting Up - Macintosh, on page 76
