WindowsAXIS 5600 User’s Manual Section 5: Setting Up - Windows 47Windows 95 and Windows 98Installing TCP/IPPrinters inWindows 95/98Install the AXIS Print System software on your Windows 95 orWindows 98 client, if you have not already done so. AXIS PrintSystem can be downloaded from the AXIS Online CD or from theAxis WWW home page at http://www.axis.com/.To enable printing in the TCP/IP environment, you must ensure thatthe TCP/IP protocol is enabled on your client.The set of instructions you should use to install TCP/IP printer portsis dictated by the IP address of your AXIS 5600:• If you have an active DHCP server on the network or if you havealready set the IP address of the AXIS 5600 using anothermethod, you should follow the installation instructions presentedin Installing TCP/IP Printer Ports, on page 49.• If your AXIS 5600 is not assigned with a valid IP address, youshould follow the installation instructions presented in InstallingTCP/IP Printer Ports and Setting the IP Address, on page 47.Installing TCP/IPPrinter Ports andSetting the IP AddressFollow the instructions below to install an AXIS Raw TCP/IP printerport and set the IP address of the AXIS 5600, using AXIS PrintSystem:1. Start AXIS Print System by selecting AXIS Print System from theStart menu.2. AXIS Print System starts. Select Search for newly connected printservers... and click Next>.3. Read the instructions and click Next>.
