Axis 5600 User Manual

Also see for 5600+: Specification User guide Installation guide User guide User manual

Contents

Axis 5600 User Manual Manual pdf 78 page image

MacintoshAXIS 5600 User’s Manual Section 7: Setting Up - Macintosh 77Choosing a PrinterSelecting a Printer The method for choosing a printer varies depending on which versionof LaserWriter printer driver you are using.• The LaserWriter 7.0 driver assumes that you use a standard Post-Script driver, and cannot take advantage of any printer specificfeatures.• The LaserWriter 8.0 driver uses PPD files that contain printerdescriptions. This gives you full control over any features yourprinter might have.LaserWriter 7.0Printer DriverFollow the instructions below to choose a printer:1. Select Chooser from the Apple menu.2. Click the LaserWriter icon.3. If your network has more than one zone, click on the zone youwant. If your network has no zones, this box does not appear.4. Click the name of the printer you want. The default AXIS 5600printer names are shown as: AXIS_, where is the last six digits of the AXIS 5600 serial number,and is LPT1, LPT2 and COM1 respectively. For example:AXIS100086_LPT1.5. Click the Close box. This completes the configuration and closesthe Chooser.Repeat this procedure for each Macintosh computer on the networkusing the AXIS 5600.