Axis 5600 User Manual

Also see for 5600+: Specification User guide Installation guide User guide User manual

Contents

Axis 5600 User Manual Manual pdf 42 page image

NetWareAXIS 5600 User’s Manual Section 4: Setting Up - NetWare 41Basic Queue-based printing (Pure IP)Axis print servers with software version 6.0 or later allow users to printin a Pure IP environment using traditional queue-based printing. Ifyou prefer using NDPS as your printing method, please refer to Setupusing NDPS, on page 35.In the NetWare Pure IP environment, you must use NetWareAdministrator to create the printer, print server and queue objects.Installing theAXIS 5600Follow the instructions below to install the AXIS 5600 in the NetWarePure IP environment:1. Start the Configuration Wizard from the User mode in the AXIS5600 Web interface.2. Click your way through the Wizard until reaching the NetWarepage. Make sure that the PSERVER_NDS parameter is set. If youwant to change the parameter value or if the parameter value isempty, enter the desired values. The parameter value must includethe tree or the preferred file server you want to login to and theprint server name including the context. The syntax of thePSERVER_NDS parameter is described in PSERVER_NDSparameter, on page 42.3. Use NetWare Administrator to create and link the printer, printserver and queue objects in the NDS tree.4. Use the Add Printer Wizard to install the printer on your client.Note that only NDS queue based PSERVER printing issupported.Any configuration and management of the AXIS 5600 can beperformed from any standard Web browser. Please refer to Using a Webbrowser, on page 99.In Pure IP environments, the AXIS 5600 supports NDS queue basedPSERVER printing or NDPS printing. Refer to Queue-based PrintingMethods, on page 43 alternatively Setup using NDPS, on page 35.