AXIS 5800+ Mobile User’s Manual Section 11 Management and Configuration 1112. Bluetooth wireless technology must be enabled on your printserver. This function is enabled by default upon installation.Browse to the internal web pages of your AXIS 5800+ Mobileprint server. Click Admin | Network settings | Detailed view |Bluetooth. Make sure the Bluetooth Enabled "YES" radio-buttonis chosen.3. When printing from a mobile phone, make sure you are using aPCL4 printer with the AXIS 5800+ Mobile print server. Thisprinter must be attached to the LPT1 port of the print server.4. Make sure that your printer is connected to the correct printerport of the AXIS 5800+ Mobile print server. Go to Admin |Network settings | Detailed view | Bluetooth and make sure thephysical port you have chosen is selected (LPT1 or LPT2).5. Make sure your communicating Bluetooth devices are locatedwithin 10 meters of each other, closer if there are objectsinbetween.Print Server SettingsSome useful settings that can be changed in the print server aredescribed here. See the print server’s Help pages for detailedinformation on all print server settings.Changing the NetworkPrinter’s ’Name’From the print server’s web interface you can assign a user-friendly name to a network printer. This name will then show upunder the ’Name’ column in AXIS Print System and AXISWireless Printing Utility.1. Log into the AXIS 5800+ Mobile internal web pages and choose|admin | This Print Server | General | Print Server Name.2. Enter the new name of the print server and click OK.
