AXIS 5800+ Mobile User’s Manual Section 11 Management and Configuration 115Using Logical Printers to Customize your PrintingThe AXIS 5800+ Mobile has a powerful facility for altering theprint data. This means that your desired print format can berealized on any type of printer. The following actions can beinvoked from the AXIS 5800+ Mobile:• The character set can be changed to suit the printer• Strings can be added before and after the print data• Strings within the print data can be substituted• ASCII to PostScript conversion• Redirection of print data to another printer if the printer is busy• Hex Dump mode to assist with printing problemsIf any of these actions are required, a Logical Printer is used tochange the print data before being sent to the printer port. Thereare eight logical printers (PR1-PR8) that can be set up to filterthe print data.The default logical printers settings are such that PR1-PR4 causeno change to the flow of print data, while PR5-PR8 add CR to LFcontrol characters:Each logical printer can be set via the print servers’ internal webpages: Open a Web browser, enter the IP address of the printserver in the "URL/Adress"-field and choose Admin | LogicalPrinter Settings.The logical printers can also be set up by editing the config file.Logical Printer Changes to dataPR1 no changePR2 no changePR3 no changePR4 no changePR5 add CR to LFPR6 add CR to LFPR7 add CR to LFPR8 add CR to LF