AXIS 5800+ Mobile User’s Manual Section 4 Basic Installation (Cable & Wireless) 21Section 4 Basic Installation (Cable & Wireless)Installation ProceduresAfter you have verified that no items presented in PackageContents, on page 11 are missing, you can proceed to installyour AXIS 5800+ Mobile. Follow the instructions below toinstall the AXIS 5800+ Mobile print server in a cable network:1. Connect the external components as described in Connect theHardware, on page 212. Assign an IP-address to your AXIS 5800+ Mobile print server,described in Assign an IP address to the print server, on page 23.3. Configure your AXIS 5800+ Mobile print server according to theConfiguring your print server - Installation Guide, on page 36.Connect the HardwareFollow these instructions to connect your AXIS 5800+ Mobileprint server to your printer(s) and your network.Caution • The AXIS 5800+ Mobile external power supply you are usingmust be marked with the correct voltage! Refer to PackageContents, on page 11.1. Make sure that your printer is switched off and that the AXIS5800+ Mobile external power supply is disconnected.2. Locate the serial number, found on the underside label of theAXIS 5800+ Mobile, and write it down. You will need this numberto set the IP address of the print server.3. Connect the printer to the LPT1 or the LPT2 port on the AXIS5800+ Mobile using an appropriate printer cable. Make sure theBluetooth antennna is pointing upwards.
