AXIS 5800+ Mobile User’s Manual Section 6 Setting Up - NetWare 61Section 6 Setting Up - NetWareThis section describes how to continue the installation of theAXIS 5800+ Mobile in the NetWare environment. Identify whichtransport protocol you are running on your network and whichinstallation method you should use. Continue the installation byselecting the appropriate installing instructions from the tablebelow:If you intend to operate your AXIS 5800+ Mobile in a multi-protocol, mixed environment, you should also proceed to theother relevant sections in this manual, namely:Section 5 Setting Up - Windows, on page 37Section 7 Setting Up - Macintosh, on page 69Section 8 Setting Up - UNIX, on page 76Note: • Installation instructions for Windows 3.1, WfW and OS/2 arefound on www.axis.com and the AXIS Network Product CD.Installationmethod Transport protocol ActionNDPS TCP/IPIPX/SPXSee Setup using NDPS, on page 62Proceed with Installing the AXIS 5800+ Mobile in an NDPS environments, on page 62.PrinterConfigurationmethodTransport protocol ActionPSERVER mode IP/IPXSee Setup using Queue-based printing over IP/IPX in PSERVER Mode, on page 64 andthenQueue-based Printing Methods, on page 67Remote Printermode IPX/SPXSee Setup for Queue-based printing over IPX/SPX (Remote Printer Mode), on page 66and thenQueue-based Printing Methods, on page 67
