Section 4 Basic Installation (Cable & Wireless) AXIS 5800+ Mobile User’s Manual24Methods for settingthe IP AddressYou can set the IP address of your AXIS 5800+ Mobile usingone of the following methods, depending on your networkoperating environment:* The IP address of the print server will be set automaticallyusing these methods.Notes: • The ARP and RARP methods operate on single network segmentsonly, that is they cannot be used over routers.• The ability to set the IP address with ARP and PING will only beenabled the first 4 minutes after rebooting the print server• Refer to Setting Parameters, on page 74 for information aboutsetting the IP address in the Macintosh environment.Method Network environments See ...AXIS IPJumpStarterWindows95/98/NT/Me/2000/XPSet the IP address using AXIS IPJumpStarter, on page 28DHCP* Windows NT/Me2000/XP, UNIX, NetWareSetting the IP address using DHCP,on page 29ARPWindows95/98/NT/Me/2000/XPSetting the IP address Using ARP inWindows, on page 31UNIX/Mac OS X Using ARP in UNIX and Mac OS X, onpage 32RARP* UNIX Using RARP in UNIX, on page 33BOOTP* UNIX, NetWare Using BOOTP in UNIX, on page 34Auto-IP* Windows 98/ME/2000/XP Setting the IP address using Auto-IP,on page 30
