Axis M1137 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 SeriesConfigure your deviceSet up network storageTo store recordings on the network, you need to set up your network storage.1. Go to System > Storage.2. Click +Add network storage under Network storage.3. Type the IP address of the host server.4. Type the name of the shared location on the host server under Network Share.5. Type the username and password.6. Select the SMB version or leave it on Auto.7. Check Add share even if connection fails if you are experiencing temporary connection issues, or the share is notyet configured.8. Click Add.Record and watch videoRecord video directly from the camera1. Go to Video > Image.2. To start a recording, click .If you haven’t set up any storage, click Set up. You can use an SD card or network storage.- See Set up network storage on page 11.3. To stop recording, click again.Watch video1. Go to Recordings.2. Click for your recording in the list.Set up rules for eventsYou can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detectsmotion, or show an overlay text while the device is recording.To learn more, check out our guide Get started with rules for events.Trigger an action1. Go to System > Events and add a rule. The rule defines when the device will perform certain actions. You can setup rules as scheduled, recurring, or manually triggered.2. Enter a Name.3. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of theconditions must be met to trigger the action.4. Select which Action the device should perform when the conditions are met.11