Axis M1137 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 SeriesThe device interfaceNoteWe recommend you not to turn on Defog in scenes with low contrast, large light level variations, or when the autofocus isslightly off. This can affect the image quality, for example, by increasing the contrast. Furthermore, too much light cannegatively impact the image quality when defog is active.Image correctionImportantWe recommend you not to use multiple image correction features at the same time, since it can lead to performance issues.Barrel distortion correction (BDC) : Turn on to get a straighter image if it suffers from barrel distortion. Barrel distortionis a lens effect that makes the image appear curved and bent outwards. The condition is seen more clearly when the image iszoomed out.Crop: Use the slider to adjust the correction level. A lower level means that the image width is kept at the expense of imageheight and resolution. A higher level means that image height and resolution are kept at the expense of image width.Remove distortion: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense ofimage height and resolution. Bloat means that image height and resolution are kept at the expense of image width.Electronic image stabilization (EIS): Turn on to get a smoother and steadier image with less blur. We recommend you to useEIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example, wind orpassing traffic.Focal length: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle ofview, while a lower value leads to a lower magnification and a wider angle of view.Stabilizer margin: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to stabilize. Ifthe product is mounted in an environment with a lot of vibration, move the slider towards Max. As a result, a smaller sceneis captured. If the environment has less vibration, move the slider towards Min.Straighten image: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. Thefunctionality is useful when it’s not possible to mount the camera exactly level. Ideally, straighten the image during installation.: Click to show a supporting grid in the image.: Click to hide the grid.The image before and after it has been straightened.20