Axis M1137 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 SeriesConfigure your deviceNoteIf you make changes to an active rule, the rule must be turned on again for the changes to take effect.Record video when the camera detects an objectThis example explains how to set up the camera to start recording to the SD card five seconds before it detects an object and tostop one minute after.1. Start the application if it is not already running.2. Make sure you have set up the application according to your needs.Create a rule:1. Go to System > Events and add a rule.2. Type a name for the rule.3. In the list of actions, under Recordings, select Record video while the rule is active.4. In the list of storage options, select SD_DISK.5. Select a stream profile.6. Set the prebuffer time to 5 seconds.7. Set the postbuffer time to 60 seconds.8. Click Save.Record video when the camera detects loud noisesThis example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and tostop one minute after.Turn on audio:1. Set up the stream profile to include audio, see .Turn on audio detection:1. Go to System > Detectors > Audio detection.2. Adjust the sound level according to your needs.Create a rule:1. Go to System > Events and add a rule.2. Type a name for the rule.3. In the list of conditions, under Audio, select Audio Detection.4. In the list of actions, under Recordings, select Record video.5. In the list of storage options, select SD_DISK.6. Select the stream profile where audio has been turned on.7. Set the prebuffer time to 5 seconds.8. Set the postbuffer time to 60 seconds.9. Click Save.12