Axis M1137 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 SeriesThe device interfaceSystemDate and timeThe time format depends on the web browser’s language settings.NoteWe recommend you to synchronize the device’s date and time with an NTP server.Synchronization: Select an option for synchronizing the device’s date and time.• Automatic date and time (NTP server using DHCP): Synchronize with the NTP server connected to the DHCP server.• Automatic date and time (manual NTP server): Synchronize with NTP servers of your choice.- Primary NTP server and Secondary NTP server: Enter the IP address of one or two NTP servers. When you usetwo NTP servers, the device synchronizes and adapts its time based on input from both.• Custom date and time: Manually set the date and time. Click Get from system to fetch the date and time settingsonce from your computer or mobile device.Time zone: Select which time zone to use. Time will be automatically adjusted for daylight saving time and standard time.NoteThe system uses the date and time settings in all recordings, logs and system settings.NetworkIPv4 and IPv6IPv4• Automatic IP (DHCP) and DNS (DHCP): The recommended setting for most networks. The current settings areupdated automatically.• Automatic IP (DHCP) and manual DNS: Contact your network administrator to configure the manual settings. Thecurrent automatic settings are updated automatically.• Manual IP and DNS: Contact your network administrator to configure the settings.IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks,provided that each address is unique. To avoid conflicts, we recommend you to contact your network administrator before youassign a static IP address.Subnet mask: Enter the subnet mask.Router: Enter the IP address of the default router (gateway) used to connect devices that are attached to different networks andnetwork segments.Hostname: Enter the hostname.Search domains: When you use a hostname that is not fully qualified, click Add search domain and enter a domain in which tosearch for the hostname used by the device.DNS servers: Click Add DNS server and enter the IP address of the primary DNS server. This provides the translation of hostnamesto IP addresses on your network.IPv6Assign IPv6 automatically: Select to let the network router assign an IP address to the device automatically.HTTP and HTTPS25