Axis M1137 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 SeriesThe device interfaceClick to show I/O output ports. Use the switch to open or close the circuit of a port, for example to test external devices.Click to manually turn on or turn off the IR illumination.Click to turn on or turn off the available on-screen controls.Click to manually turn on the heater for a selected period of time.Click to start a continuous recording of the live video stream. Click again to stop the recording. If a recording is ongoing, itwill resume automatically after a reboot.Click to show the storage that is configured for the device. To configure the storage you need to be logged in as anadministrator.Click to access more settings:• Video format: Select the encoding format to use in the live view. If you select a format with video compression, itresults in a higher CPU and memory usage.• Client stream information: Turn on to show dynamic information about the video stream used by the browser thatshows the live video stream. The bitrate information differs from the information shown in a text overlay, because ofdifferent information sources. The bitrate in the client stream information is the bitrate of the last second, and itcomes from the encoding driver of the device. The bitrate in the overlay is the average bitrate of the last 5 seconds,and it comes from the browser. Both values cover only the raw video stream and not the additional bandwidthgenerated when it’s transported over the network through UDP/TCP/HTTP.• Adaptive stream: Turn on to adapt the image resolution to the viewing client’s actual display resolution, to increasethe user experience and help prevent a possible overload of the client’s hardware. The adaptive stream is onlyapplied when you view the live video stream in the web interface in a browser. When adaptive stream is turned on,the maximum frame rate is 30 fps. If you take a snapshot while adaptive stream is turned on, it will use the imageresolution selected by the adaptive stream.• Level grid: Click to show the level grid. The grid helps you decide if the image is horizontally aligned. Clickto hide it.• Refresh: Click to refresh the still image in the live view.Click to show the live view at full resolution. If the full resolution is larger than your screen size, use the smaller image tonavigate in the image.Click to show the live video stream in full screen. Press ESC to exit full screen mode.InstallationCapture mode: A capture mode is a preset configuration that defines how the camera captures images. When you change thecapture mode, it can affect many other settings, such as view areas and privacy masks.Mounting position: The orientation of the image can change depending on how the camera is mounted.Power line frequency: Select the frequency that is used in your region to minimize image flicker. The American regionsusually use 60 Hz. The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, checkwith the local authorities.15