Axis W100 User Manual

Also see for W100: User manual Manual User manual User manual Installation guide

10/19/21, 7:42 PM AXIS W100 Body Worn Camera User manualhttps://help.axis.com/axis-w100-body-worn-camera 17/68Set up self-assign camera assignmentNoteTo set up self-assign camera assignment, you need to pair the body worn user with a self-assign tag:How to set up self-assign camera assignment for yoHow to set up self-assign camera assignment for yo……Set up self-assign camera assignmentSelf-assign camera assignment mode is accessed through the system setup wizard,and is available after a system reset.The RFID reader required for this setup is External RFID Card Reader 125kHz +13.56MHz with NFC (USB).Always install your RFID reader(s) in the same location as your docking stations.1. Connect the RFID reader to the system controller. Wait for the LED on the reader to lightup green, which takes about 15 seconds. The reader now has the correct firmware and isready for use.2. Disconnect the RFID reader from the system controller.3. Connect the same RFID reader to the computer that you use for accessing AXIS Body WornManager.AXIS W100 Body Worn Camera󰍜