2-2 Introduction MN19022.2 Receiving and inspectionWhen you receive your FlexDriveII, there are several things you should do immediately:1. Check the condition of the shipping container and report any damage immediately to thecarrier that delivered your FlexDriveII.2. Remove the FlexDriveII from the shipping container and remove all packing material. Thecontainer and packing materials may be retained for future shipment.3. Verify that the catalog number of the FlexDriveII you received is the same as the catalognumber listed on your purchase order. The catalog number is described in the next section.4. Inspect the FlexDriveII for external damage during shipment and report any damage to thecarrier that delivered your FlexDriveII.5. If FlexDriveII is to be stored for several weeks before use, be sure that it is stored in a locationthat conforms to the storage humidity and temperature specifications shown in section 7.1.18.2.2.1 Identifying the catalog numberThe FlexDriveII is available with different current ratings and package sizes. The catalognumber is marked on the front of the unit, just below the Baldor logo. It is a good idea to lookfor the catalog number (sometimes shown as ID/No: ) and write it in the space provided here:Catalog number: F_H______________-________Installed at: ________________________ Date: ______A description of a catalog number is shown here, using the example FDH1A05TB-RC23:Meaning AlternativesFDH FlexDriveII family FPH=Flex+DriveII1 Requires an AC supply voltage of 115 Volts, 1Φ 2=230V (1Φ or 3Φ);4=230V-460V (3Φ)A05 Continuous current rating of 5.0A A02=2.5A; A07=7.5A; A15=15A;A20=20A; A27=27.5AT Built in AC power supply -B Dynamic Brake with a built in transistor andresistor (available on 2.5A and 5A models only)R= Requires external brakingresistorR Feedback option is a resolver E=Encoder;D=EnDat (absolute encoder)C Option fitted: 1 CAN channelB=CAN & Auxiliary I/O(Flex+DriveII only); D=DeviceNet;P=Profibus DP;N=No options specified2 Serial port type is combined RS232 / RS485 -3 Customerís own 24VDC supply is required topower the internal FlexDriveII logic0= Internally generated 24VDCsupply** An external 24VDC supply will always be required to operate the enable input, digital inputsand digital outputs on connector X3 . See sections 4.3.1 to 4.3.5.
