www.baldormotion.com2-2 Introduction MN19432.2 Receiving and inspectionWhen you receive your MotiFlex e100, there are several things you should do immediately:1. Check the condition of the shipping container and report any damage immediately to thecarrier that delivered your MotiFlex e100.2. Remove the MotiFlex e100 from the shipping container and remove all packing material. Thecontainer and packing materials may be retained for future shipment.3. Verify that the catalog number of the MotiFlex e100 you received is the same as the catalognumber listed on your purchase order. The catalog number is described in the next section.4. Inspect the MotiFlex e100 for external damage during shipment and report any damage tothe carrier that delivered your MotiFlex e100.5. If MotiFlex e100 is to be stored for several weeks before use, be sure that it is stored in alocation that conforms to the storage humidity and temperature specifications shown insection 8.8.Note: The 48 A and 65 A MotiFlex e100 have a recess at the rear of the product which isfilled with a block of packaging foam. Remove this foam before mounting the drive.2.2.1 Identifying the catalog numberThe MotiFlex e100 is available with different current ratings. The catalog number is marked onthe side of the unit. It is a good idea to look for the catalog number (sometimes shown as ID/No:)and write it in the space provided here:Catalog number: MFE_____________________Installed at: ________________________ Date: ______A description of a catalog number is shown here, using the example MFE460A003x:Meaning AlternativesMFE MotiFlex e100 family -460 Requires an AC supply voltage of 230 - 480 Volts, 3Φ -A003 Continuous current rating of 3 AA001=1.5 A; A006=6 A;A010=10.5 A; A016=16 A;A021=21 A; A026=26 A;A033=33.5 A; A048=48 A;A065=65 Ax A letter indicating the hardware revision. This does notaffect the capabilities of the MotiFlex e100 unlessotherwise stated.-
