www.baldormotion.comD-2 CE & UL MN1943D.1.2 Declaration of conformityEC Declaration of ConformityDate: 21/01/08 Ref: DE00024-001Manufacturer: Baldor UK LimitedAddress: Mint Motion Centre, 6 Bristol Distribution Park, Hawkley Drive, Bristol, BS32 0BF, United KingdomHereby declare that the product:MotiFlex e100 Single and Multi-Axis Servo Drive, being one of:MFE460A0xxx (where xxx = product variant)when used in accordance with the guidance given in the corresponding MotiFlex e100 Installation Manual (MN1943)conforms with the protection requirements of the following Council Directives, by application of the relevant harmonizedstandards:The Electromagnetic Compatibility Directive 2004/108/EC and its amending directives:Standard:EN61800-3:2004Title:Adjustable speed electrical power drive systems Part 3: EMC Requirements andspecific test methods.The Low Voltage Directive 2006/95/EC and its amending directives:Standard:EN61800-5-1:2007Title:Adjustable speed electrical power drive systems. Safety requirements. Electrical,thermal and energy.EN61800-2:1998 Adjustable speed electrical power drive systems. General requirements. Ratingspecifications for low voltage adjustable frequency a.c. power drive systems.EN50178:1997 Electronic equipment for use in power installations.EN60529:1991+A1 Specification for degrees of protection provided by enclosures (IP code).EC Declaration of IncorporationThe Machinery Directive 98/37/EC and its amending directives:The above product is intended to be incorporated into machinery or to be assembled with other machinery to constitutemachinery covered by directive 98/37/EC. As such it does therefore not in every respect comply with the provisions ofdirective 98/37/EC.User must follow the guidance given in this directive to meet all necessary protection requirements. All instructions,warnings & safety information of the product manual MN1943 must be adhered to. User must follow the guidance given inharmonized standard EN60204-1 (Safety of Machinery) to meet necessary protection requirements of this directive.Furthermore it is declared that it may not be put into service before the machinery in which it will be incorporated isdeclared to comply with the provisions of directive 98/37/EC, as amended.Signed:Dr. Gerry BoastEngineering Manager
