Banner Q4X Instruction Manual

Also see for Q4X Series: Quick start guide Instruction manual Quick start guide Quick start guide Quick start guide

Banner Q4X Instruction Manual Manual pdf 25 page image

Condition TEACH Result DisplayOne valid TEACH point that, after theoffset, results in a both switch pointsoutside of the rangeSets a window (two switch points) centeredaround the following location:Model Window CenterPoint100 mm threaded barrel models 80300 mm threaded barrel models 250600 mm threaded barrel models 500110 mm flush mount models 90310 mm flush mount models 260610 mm flush mount models 510The window size is:Model Window Size100 mm threaded barrel and 110mm flush mount models±12.5 mm300 mm threaded barrel and 310mm flush mount models± 25 mm600 mm threaded barrel and 610mm flush mount models± 25 mmand the window center pointdistance flash alternately on thedisplay.3.6.4 One-Point Background SuppressionOne-point background suppression sets a single switch point in front of the taught target distance. Objects beyond the taughtswitch point are ignored. The switch point is set in front of the taught target distance by the vertical minimum object separation.See Figure 23 on page 34.Press and Hold> 2sPress againSwitchPointValue A213Figure 20. One-Point Background SuppressionNote: The sensor must be set to = to use the following instructions. The BGS indicator is amber toindicate Background Suppression mode.Note: To program the sensor using remote input, remote input must be enabled ( = ).1. Present the target.Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Linkwww.bannerengineering.com - Tel: 763.544.3164 25