Banner Q4X Instruction Manual

Also see for Q4X Series: Quick start guide Instruction manual Quick start guide Quick start guide Quick start guide

Banner Q4X Instruction Manual Manual pdf 4 page image

1.3 Features1 23Figure 2. Sensor Features1. Output Indicator (Amber)2. Display3. Buttons1.3.1 Display and IndicatorsThe display is a 4-digit, 7-segment LED. The main screen is the Run mode screen.For 2-pt, BGS, FGS, and DYN TEACH modes, the display shows the current distance to the target in millimeters. For dual TEACHmode, the display shows the percentage matched to the taught reference surface. A display value of indicates the sensorhas not been taught.1 2Figure 3. Display in Run Mode1. Stability Indicator (STB—Green)2. Active TEACH Indicators• DYN—Dynamic (Amber)• FGS—Foreground Suppression (Amber)• BGS—Background Suppression (Amber)Note: The indicators represent the currently selected channel. However, if Output 2 is set to something other than LO, DO,or Complementary, then the indicators represent the Channel 1 status.Output Indicator• On—Output is on• Off—Output is offActive TEACH Indicators (DYN, FGS, and BGS)• DYN, FGS, and BGS all off—Two-point TEACH modeselected (default)• DYN on—Dynamic TEACH mode selected• FGS on—Foreground suppression TEACH modeselected• BGS on—Background suppression TEACH modeselected• DYN, FGS, and BGS all on—Dual TEACH modeselectedStability Indicator (STB)• On—Stable signal within the specified sensing range• Flashing—Marginal signal, the target is outside thelimits of the specified sensing range, or a multiple peakcondition exists• Off—No target detected within the specified sensingrange1.3.2 ButtonsUse the sensor buttons (SELECT)(TEACH), (+)(CH1/CH2), and (-)(MODE) to program the sensor.Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link4 www.bannerengineering.com - Tel: 763.544.3164