Banner Q4X Instruction Manual

Also see for Q4X Series: Quick start guide Instruction manual Quick start guide Quick start guide Quick start guide

Banner Q4X Instruction Manual Manual pdf 30 page image

5 SpecificationsSensing BeamVisible red Class 1 laser, 655 nmSupply Voltage (Vcc)10 to 30 V dc (Class 2 supply) (10% max ripple within limits)Power and Current Consumption, exclusive of load< 700 mWSensing Range—Threaded Barrel Models600 mm models: 25 mm to 600 mm (0.98 in to 23.62 in)300 mm models: 25 mm to 300 mm (0.98 in to 11.81 in)100 mm models: 25 mm to 100 mm (0.98 in 3.94 in)Sensing Range—Flush Mount Models610 mm models: 35 mm to 610 mm (1.38 in to 24.02 in)310 mm models: 35 mm to 310 mm (1.38 in to 12.20 in)110 mm models: 35 mm to 110 mm (1.38 in to 4.33 in)Output ConfigurationFirst output = IO-Link, Push/pullSecondary output = PNP only output or input, or pulse frequency modulatedoutputOutput Rating100 mA max capability each output100 mA max total load current for sensorSaturation: < 2 VOff-state leakage current: < 50 μA PNP at 30 V (N.A. push/pull)Discrete Output Distance RepeatabilityTable 8: 600/610 mm ModelsDistance (mm) RepeatabilityThreaded Barrel Models Flush Mount Models25 to 100 mm 35 to 110 mm ± 0.5 mm100 to 600 mm 110 to 610 mm ± 0.5%Table 9: 300/310 mm ModelsDistance (mm) RepeatabilityThreaded Barrel Models Flush Mount Models25 to 50 mm 35 to 60 mm ± 0.5 mm50 to 300 mm 60 to 310 mm ± 1% of rangeTable 10: 100/110 mm ModelsDistance (mm) RepeatabilityThreaded Barrel Models Flush Mount Models25 to 100 mm 35 to 110 mm +/-0.2 mmRemote InputAllowable Input Voltage Range: 0 to VccActive High (internal weak pulldown): High state > (VCC - 2 V) @ 1.5 mA max.Supply/Output Protection CircuitryProtected against reverse polarity and transient overvoltagesResponse SpeedUser selectable, 100, 110, 300, and 310 mm models:• —1.5 milliseconds• —3 milliseconds• —10 milliseconds• —25 milliseconds• —50 millisecondsUser selectable, 600 and 610 mm models:• —2 milliseconds• —5 milliseconds• —15 milliseconds• —25 milliseconds• —50 millisecondsDelay at Power Up100, 110, 300, 310 mm models: < 750 ms600, 610 mm models: < 1.5 sMaximum TorqueSide mounting: 1 N·m (9 in·lbs)Nose mounting: 20 N·m (177 in·lbs)Ambient Light Immunity> 5,000 lux at 300 mm> 2,000 lux at 600 mmConnectorIntegral 4-pin M12/Euro-style male quick disconnect (QD)ConstructionHousing: 316 L stainless steelLens cover: PMMA acrylicLightpipe and display window: polysulfoneTemperature Effect0.05 mm/°C at < 125 mm (threaded barrel models)/< 135 mm (flushmount models)0.35 mm/°C at 300 mm (threaded barrel models)/310 mm (flush mountmodels)1.0 mm/°C at 600 mm (threaded barrel models)/ 610 mm (flush mountmodels)Chemical CompatibilityCompatible with commonly used acidic or caustic cleaning anddisinfecting chemicals used in equipment cleaning and sanitation.ECOLAB® certified.Compatible with typical cutting fluids and lubricating fluids used inmachining centersIO-Link InterfaceSupports Smart Sensor Profile: YesBaud Rate: 38400 bpsProcess Data Widths: 16 bitsIODD files: Provides all programming options of the display, plusadditional functionality.Application NoteFor optimum performance, allow 10 minutes for the sensor to warm upQ4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link30 www.bannerengineering.com - Tel: 763.544.3164