Banner Q4X Instruction Manual

Also see for Q4X Series: Quick start guide Instruction manual Quick start guide Quick start guide Quick start guide

Banner Q4X Instruction Manual Manual pdf 32 page image

Required Overcurrent ProtectionWARNING: Electrical connections must be made byqualified personnel in accordance with local andnational electrical codes and regulations.Overcurrent protection is required to be provided by end product applicationper the supplied table.Overcurrent protection may be provided with external fusing or via CurrentLimiting, Class 2 Power Supply.Supply wiring leads < 24 AWG shall not be spliced.For additional product support, go to www.bannerengineering.com.Supply Wiring (AWG) Required Overcurrent Protection (Amps)20 5.022 3.024 2.026 1.028 0.830 0.5CertificationsIndustrialControlEquipment3TJJClass 2 powerUL Environmental Rating: Type 1chemical compatibility certifiedECOLAB is a registered trademark of Ecolab USA Inc. All rights reserved.5.1 DimensionsAll measurements are listed in millimeters [inches], unless noted otherwise.Figure 21. Threaded Barrel ModelsQ4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link32 www.bannerengineering.com - Tel: 763.544.3164