3. Connect the external light cable (optional) to the light connection (2) if the light is powered by the sensor.CAUTION: Use Appropriate PowerIf the light is powered by the sensor, the sensor power source must be 24 V dc. This connection isfor Banner lights only.Table 1: Power and I/O PinoutsPin Wire Color Description Direction1 White Discrete I/O #3 Input/Output2 Brown 12 V dc to 30 V dc Input3 Green I/O output commonImportant: For PNP (sourcing) outputs connect pin 3to +V dc, for NPN (sinking) outputs connect pin 3 to 0V dc. The discrete I/O pins are 1, 5, 8, 10, and 11.-4 Yellow Reserved -5 Gray Discrete I/O #5 Input/Output6 Pink Trigger input Input7 Blue Common Input8 Red Discrete I/O #2 Input/Output9 Orange I/O input commonImportant: For PNP (sourcing) inputs connect pin 9 to0 V dc, for NPN (sinking) inputs connect pin 9 to +Vdc. The discrete I/O pins are 1, 5, 6, 8, 10, and 11.-10 Light Blue Discrete I/O #4 Input/Output11 Black Discrete I/O #1 Input/Output12 Violet Reserved -Shield Bare metal Chassis ground -4.3.1 Wiring DiagramsVELoad+-12-30V dcOutputPowerSupplyOutput CommonVE OutputFigure 5. PNP OutputVE+-12-30V dcOutput CommonVE OutputLoad OutputPowerSupplyFigure 6. NPN OutputVEInput Common+-VE InputOpto-isolator 12-30V dcPNP Driver InputPowerSupplyFigure 7. PNP InputVE Input Common +-VE Input12-30V dcOpto-isolatorInputPowerSupplyNPN DriverFigure 8. NPN InputVE Series Smart Camerawww.bannerengineering.com - Tel: 763.544.3164 13
