WORD # WORD NAME DATA TYPE8-9 Pass Count 32-bit integer10-11 Fail Count 32-bit integer12-13 Missed Triggers 32-bit integer14-15 Current Inspection Time 32-bit float16 Sensor Pass/Fail Bits (see Sensor Pass/Fail Bits on page 144) 16-bit integer17-59 User-defined (see Tool-Specific Results: EtherNet/IP on page 144) Selection dependent13.3.3 Input and Output BitsTable 7: Input Bits Register (Command Bits)Bit Position15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved Trigger TeachLatchProductChangeTable 8: Input Bits ACK Register (ACK Bits)Bit Position15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved reserved TriggerACKTeachLatch ACKProductChangeACKTable 9: Output Bits Register (Sensor Status Bits)Bit Position15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0ExecutionErrorSystemErrorTeachErrorMissedTrigger reserved reserved Output 5 Output 4 Output 3 Output 2 Output 1 reserved ReadyLatch reserved Pass/Fail Ready13.3.4 Sensor Pass/Fail BitsFor the sensor pass/fail bits, pass = 1 and fail = 0.Table 10: Sensor Pass/Fail BitsBit Position15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0VisionTool 15Pass/FailVisionTool 14Pass/FailVisionTool 13Pass/FailVisionTool 12Pass/FailVisionTool 11Pass/FailVisionTool 10Pass/FailVisionTool 9Pass/FailVisionTool 8Pass/FailVisionTool 7Pass/FailVisionTool 6Pass/FailVisionTool 5Pass/FailVisionTool 4Pass/FailVisionTool 3Pass/FailVisionTool 2Pass/FailVisionTool 1Pass/FailCameraToolPass/Fail13.3.5 Tool-Specific Results: EtherNet/IPConfigure the VE to output user-defined, tool-specific results to the PLC using a custom map.Each assembly instance includes system-defined and user-defined results in the map. To set the user-defined, tool-specificresults in the custom map, navigate: System Settings > Communications > Industrial Protocols.VE Series Smart Camera144 www.bannerengineering.com - Tel: 763.544.3164
