11 Sensor DisplayThe LCD display on the top of the sensor provides access to view or change several settings without using Vision Manager.The display provides limited programming options:• ETHER—Ethernet settings• PCHANGE—Product change• IO—Input/Output settings• IMAGE—Image settings• INFO—Sensor information• SYSERROR—System errors, if present• DISPLAY—Display settings• REBOOT—RebootAccess the sensor menu by pressing Enter from the Home Screen.11.1 Sensor Display InterfaceUse the sensor buttons to configure several sensor settings and to access sensor information.Down and Up ButtonsPress Down and Up to:• Navigate the menu systems• Change programming settingsWhen navigating the menu systems, the menu items loop.Enter ButtonPress Enter to:• Access the Sensor Menu• Access the submenus• Save changesIn the Sensor Menu, a check mark in the lower right corner of the display indicates that pressing Enteraccesses a submenu.Escape ButtonPress Escape to:• Leave the current menu and return to the parent menu• Leave the current menu and return to the Home Screen from any menuImportant: Pressing Escape discards any unsaved changes.In the Sensor Menu, a return arrow in the upper left corner of the display indicates that pressing Escapereturns to the parent menu.Press and hold Escape for 2 seconds to return to the Home Screen from any menu.11.2 Locking and Unlocking the SensorUse the lock and unlock feature to prevent unauthorized or accidental programming changes.A lock symbol displays in the upper left corner of the display to indicate when the sensor is locked. When locked, themenus are available to view settings, but the values cannot be changed.To lock or unlock the sensor using the buttons, press and hold Down and Escape simultaneously until the locksymbol displays.VE Series Smart Camerawww.bannerengineering.com - Tel: 763.544.3164 131