Figure 42. View Exported Log Tab6.5.5 UnitsUse Units to select a unit to display and to publish results that represent distance, size, and location calculations.Figure 43. UnitsBy default, distance, size, and location calculations are shown in pixels. To change the displayed units, from the Mode list,select Scaling and then select the desired measurement unit and parameters. The following Measurement Units areavailable:• Microns (μm)• Millimeters (mm)• Centimeters (cm)• Meters (m)• Mils (mil)• Inches (in)VE Series Smart Camerawww.bannerengineering.com - Tel: 763.544.3164 41
