10 EmulatorsUse Emulators on the Home screen to connect to the emulator.Figure 256. EmulatorsClick to connect to the desired emulator. This tab also displays the Image location on the computer, as well as theemulator version information.Click under Image Location to change the directory for the reference images. The default directory for images is C: >Users > Public > Documents > Banner Vision Manager > VE Series > VE xMP > Images. Both 8-bit monochromebitmap (BMP) images and inspection logs are supported. Bitmap images should be the same resolution as the VE camera.If inspection logs are placed in the Images directory, the emulator automatically extracts the image out of the inspectionlog and uses it to run the currently loaded inspection.The Emulators tab includes all available features and all tools function the same as they do when running on a sensor. Onthe emulator, execution time is not calculated.10.1 Backup or Restore the EmulatorEmulator settings and inspections can be backed up and restored.The backup file is saved to the location of your choice.1. From the Home screen, click Emulators.2. Make sure that no sensors or emulators are connected to the Vision Manager software.3. Click , then click Backup.4. Follow the prompts to save a backup file.A message displays saying that the backup was successful.5. To restore the sensor data, click , then click Restore.6. Follow the prompts to restore the sensor data. A sensor backup file can be used to restore the emulator.NOTE: This process can take several minutes.A message displays saying that the restore was successful.VE Series Smart Camera130 www.bannerengineering.com - Tel: 763.544.3164
