3.2.4 Lock SensorThis option provides for locking the sensor to prevent accidental modification of settings. When locked, the sensor only provides accessto pass/fail statistics, as well as the ability to view logs and to save them to a USB device. A lock icon in the upper left corner of thesensor display indicates that the sensor is locked. Note that the sensor can be locked with or without a password. If a password is notused, unlock the sensor by clicking on the Unlock Device menu. When a password is used, it must be 4 digits entered using the softwarekeypad. If the password is lost, use the Password Reset Utility software provided in the CD to obtain a Reset Key.NOTE: This menu option is not available on the Emulator.Main Menu > System > Lock Sensor3.2.5 Communications MenuMain Menu > System > CommunicationsThe Communications menu is used to configure the serial and ethernet I/O channel. There are six menu options:• Ethernet I/O for configuring the Ethernet port• Serial I/O for configuring the Serial port• Industrial Ethernet settings• Command Channel for enabling or disabling commands to the sensor through Ethernet or Serial channels• Data Export Channel for enabling or disabling the channel for data export only• Image Export Channel for enabling or disabling the channel for image export onlyNOTE: Either Data Export Channel, Image Export Channel, OR Command Channel can be enabled.iVu Plus BCR User's Manual26 www.bannerengineering.com - tel: 763-544-3164 Rev. B
