Banner iVu Plus BCR User Manual

Also see for iVu Plus BCR: Instruction manual Instruction manual Quick start guide

Contents

Industrial EthernetMain Menu > System > Communications > Industrial EthernetThe iVuPlus device can be controlled or monitored over Industrial Ethernet using Ethernet/IP, Modbus/TCP or PCCC protocols. Thisdocument will help you to set up the iVu Plus in the desired configuration and provide you with information you will need to connect to themaster device (PLC, HMI, etc.).ConnectionMain Menu > System > Communications > Industrial Ethernet > ConnectionThe Connection screen is used to enable either Modbus or EIP/PCCC protocols on Industrial Ethernet channel. Select 'Disable' to com-pletely disable Industrial Etherent channel.StatusMain Menu > System > Communications > Industrial Ethernet > StatusThe status screen displays information about the current connection. This information is protocol specific.View LogsMain Menu > System > Communications > Industrial Ethernet > View LogsThis screen displays the list of recent events on Industrial Ethernet channel. Detailed logging can be selected under Setup when trouble-shooting.Command ChannelMain Menu > System > Communications > Command ChannelThe iVu command channel is a bi-directional communication protocol that currently supports ASCII via the RS-232 serial interface orethernet interface, and enables other devices to remotely control the iVu sensor and to access sensor results.ConnectionMain Menu > System > Communications > Command Channel > ConnectionThe Connection screen is used to enable or disable the Command Channel.iVu Plus BCR User's Manual28 www.bannerengineering.com - tel: 763-544-3164 Rev. B