Banner iVu Plus TG Gen2 Instruction Manual
Also see for iVu PLUS TG: Quick start guideUser manual
                                                                                                                                                                                                                | |
Contents
| 
Coarse resolution has a maximum FOV of 376×240 pixels, and Fine resolution has a maximum FOV of 752×480 pixels.Fine resolution has 4 times more pixels than Coarse resolution. Inspection performance may be affected when using Fineresolution, depending on the application. By default, the FOV is set to the default FOV size (320×240) in Coarse resolutionmode.When a new resolution is selected, Match and Sort patterns must be taught again. A trigger is required before any on-screen data is updated.Any sensor within the inspection will use the selected resolution. Only one resolution is used per inspection.5.4 System MenuMain Menu > SystemThe System menu icon is on the Main Menu, and is used to manage the sensor. The System menu provides for selectingSensor Mode, updating sensor firmware, backing up and restoring sensor Configuration, and other general system-leveloperations.5.4.1 ModeMain Menu > System > ModeThe sensor has two operating modes:• Live Mode, which is the normal operating mode where the sensor captures live images, scans, and verifiesbarcodes• Demo Mode, where inspections are run on stored images and inspection parameters.The first time the device is powered up it starts in Demo Mode and allows you to choose whether to stay in DemoMode or exit to Live Mode. Demo Mode uses stored images and inspection parameters that demonstrate how thesensor is set up without having to worry about focus, lighting, or triggers. In this mode, practice makingadjustments while observing how the adjustments affect the results. To exit Demo Mode go to Main Menu >System > Mode and select Exit Demo Mode. Upon exit, the sensor reboots into its normal operating mode withdefault settings.NOTE: Switch between Live Mode and Demo Mode any time by going to Main Menu > System >Mode.iVu Plus TG Gen2 Image Sensorwww.bannerengineering.com - Tel: 763.544.3164 37 |
Related manuals for Banner iVu PLUS TG
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine