Banner iVu Plus TG Gen2 Instruction Manual
Also see for iVu PLUS TG: Quick start guideUser manual
                                                                                                                                                                                                                | |
Contents
| 
LCD TimeoutMain Menu > System > Display Settings > LCD TimeoutThe LCD screen dims after a user-selectable period when the device is not being used. Use the arrow keys or slide the barat the bottom of the screen to set the LCD screen time out.NOTE: This screen is not available in the Emulator.Touch CalibrationMain Menu > System > Display Settings > Touch CalibrationTouchscreen Calibration may be necessary if the software does not correctly respond when an icon on the screen ispressed. The calibration routine aligns the touch screen's coordinates to the display behind it. Be sure to follow theprompts on the screen when executing the Touchscreen Calibration function.NOTE: This screen is not available in the Emulator.AdvancedMain Menu > System > Display Settings > AdvancedThe Advanced Display screen allows you to enable the Optimize Display Response option. This feature helps to make thedisplay more responsive when the sensor is busy (either inspection times are long and/or no idle time exists betweeninspections). Disable this feature if Missed Triggers occur due to touchscreen presses. With this setting disabled, thedisplay may become sluggish when the sensor is busy.5.4.8 Reboot SensorMain Menu > System > Reboot SensorThe Reboot Sensor screen allows you to force a reboot of the sensor.NOTE: This option is not available on the Emulator.5.4.9 Firmware UpdateMain Menu > System > Firmware UpdateThe Firmware Update screen is used to load the latest sensor firmware. The Firmware Update screen lists the firmwareversions it finds in the BANNER\FIRMWARE folder on the USB flash drive. When you receive a firmware update fromBanner Engineering, be sure to put it in the BANNER\FIRMWARE folder on the USB flash drive.NOTE: The Firmware Update menu is not available in the Emulator.iVu Plus TG Gen2 Image Sensorwww.bannerengineering.com - Tel: 763.544.3164 51 |
Related manuals for Banner iVu PLUS TG
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine