5. MaintenanceBarco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004 _________________________________________________________________________ 5-45.1.4 Replacing the battery of Argus ProcessorThe battery is located inside of the A RGUS P ROCESSOR on the main board.Incorrect replacement of the lithium battery may lead to a risk of exposion!The lithium battery may be replaced only with an identical battery or with a typerecommended by the manufacturer!Do not throw lithium batteries into the household waste. They must be disposed of inaccordance with local regulations concerning special waste!The battery may explode if mistreated. Do not dispose it of in fire! Do not disassemble it orattempt to recharge it!Make sure that you insert the battery the right way round. The plus pole must be on thetop!• Open the case as described in Section 6.1.1 Opening the case of Argus Processor!• Locate the battery on the main board!• Tear back the clamp until the battery lifts up!Figure 5-2Battery on the main board• Replace the lithium battery by a new one of the identical type. Do not use any other type!• Replace the top cover.
