3. Getting startedBarco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004 _________________________________________________________________________ 3-93.2 Cabling3.2.1 Power supplyCheck the power rating on your outlet before connecting ARGUS to the wall outlet or to apower strip. Contact your facilities manager or a qualified electrician if you are not surewhat type of power is supplied to your building.ARGUS is designed to operate with single-phase power systems having a grounded neutralconductor. To reduce the risk of electrical shock, do not plug into any other type of powersystem.To connect P ROCESSOR and the OMNI BUS devices to the powerpower supply, follow these steps:• If using an OMNI BUS with redundant power supply first connect an equipotential bondig conductor to theconnector [28].• Plug the female end of the power cords into the mains connections of each PROCESSOR [25] and OMNI BUS [27]respectively.Figure 3-8Mains connection of ARGUS• Plug the male end of each power cord into a power outlet.3.2.2 MouseThe standard mouse is a PS/2 mechanical mouse. Plug it into the PS/2 mouse/2 mouse jack [26].Figure 3-9PS/2 mouse jack/2 mouse jack3.2.3 KeyboardThe standard keyboard is a MF-II type keyboard with a PS/2 connector. Plug it into the PS/2 keyboard jack [27].figure 3-10PS/2 keyboard jack
