6. Advanced configurationBarco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004 _________________________________________________________________________ 6-46.1.2 Opening the case of Argus OmniBusBefore opening the case, switch off ARGUS with the power button on the back! Disconnect allpower plugs! Remove all cables!The boards of ARGUS contain CMOSMOS components. Do not touch the components, they could bedestroyed!Figure 6-5Position of screws on the back of ARGUS O MNI BUSLoosen the screws [1 - 3] shown in the figure above on the back of the case. For these screws as well as for thescrews inside of the A RGUS P ROCESSOR you need a size 2 Phillips screwdriver. Some screws inside the A RGUSP ROCESSOR can be loosened with a 5.5 spanner as well.Figure 6-6Screws on the back of the case of the ARGUS PROCESSORTear the top cover backwards unless it is not longer fixed to the sides of the housing. Now it can be easily rNow it can be easily re-moved.
