Barco Argus X Terminal User Manual

Also see for Argus X Terminal: User manual

Contents

Barco Argus X Terminal User Manual Manual pdf 36 page image

3. Getting startedBarco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004 ________________________________________________________________________ 3-183.2.8 Big Video CardThe video input card, B IG VIDEO CARD , provides the capability of displaying video signals like VCR, TV, CCTV etc. Theanalog video signals are digitized for further processing in the OMNI BUS.The Big Video Card is available in various versions; only Big Video Cards with versionFRG-2684-04 or higher are supported by the OmniBus.84-04 or higher are supported by the OmniBus.StandardThe video standards S-Video (S-VHS, Y/C) and Composite Video (VHS, FBAS, CVBS, CVS, Y) are supported.ConnectorsThe BIG VIDEO CARD has three 4-pin mini-DIN sockets. In this way, up to three S-Video signals can be connected tobe connected toA RGUS or with suitable adapters three composite signals can be connected.Port 3Port 2Port 1Video Channel 1Figure 3-23Ports of BIG VIDEO C ARDOrderThe order in that the input cards are inserted into one or more OMNI BUS devices is given in the sections 3.2.15Argus OmniBus and 3.2.16 Arrangement of expansion cards.With a monolithic system the numbering of the video channels as they are referred to by the video client (referto section 4.6.2 The video channels, please) is identical with the numbering of the cards. channel 1 is assigned tovideo-input card 1, channel 2 is assigned to video-input card 2, and so on.Within a distributed system there are many different possibilities to arrange videochannels. Please, refer to section, refer to section 6.2.6 Advanced Argus configuration.SpecificationsFor detailed technical specifications of the B IG VIDEO CARD please refer to section 7.1 Technical data.