17. Adjusting the Picture17.13.1Master Adjustment of the Analog ControlsHow to adjust the analog controls1. From the main menu, select item IMAGE SETTINGS.Note: When using the Remote Control, make sure that the address of the RC is the common or the Master address!The Image Settings menu appears on-screen and in the graphical display on the Master, showing the two main items ’Master’and ’Display’. (menu 17-28)2. Select the item you want to adjust, using the ←or→key on the Remote Control or by rotating the jog dial on the Master.3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.The bar scale, adjustable between 0 and 255, according to the selected analog control appears on-screen and in the graphicaldisplay. (image 17-17)4. Adjust the level of the analog control by rotating the jog dial on the Master or pressing the ←or→key on the Remote Control.Selected Item Pressing Key← or Jog dial to the left Pressing Key→ or Jog dial to the rightBrightness For less brightness For more brightnessContrast For less contrast For more contrastSaturation For less color intensity For more color intensityTint (NTSC signals only) Skin tones become purplish Skin tones becomes greenish5. If you want to proceed to adjustment of the analog controls per display, select item DISPLAY. This item is explained in chapterbelow ’Analog Controls adjustment per Display’.6. Press EXIT on the Remote Control or press the jog dial on the Master to return.New Value of the adjusted analog control is stored in the Cine VERSUM Master and will be applied to all linked displays.Image SettingsMasterBrightnessContrastSaturationTintDisplayBackMenu 17-28Image 17-17Analog controls17.13.2Analog Controls adjustment per DisplayThe items in the display settings per display are, Brightness, Contrast, Gamma and Color Temperature. The 2last mentioned items are already explained, see "Gamma Correction", page 117, and see "Adjusting the ColorTemperature", page 118.R5976468 CINE VERSUM SYSTEM 03112003 123
