Barco R9841020 Cine VERSUM Master Installation Manual

Also see for Cine VERSUM 50: Owner's manual Owner's manual

Contents

Barco R9841020 Cine VERSUM Master Installation Manual Manual pdf 137 page image

18. Additional settings Cine VERSUM Master18.7 Display Name ChangeWhere to find the display RENAME functionInstallationInput SlotsFile ServiceDisplay ListInternal PatternWhen no signalSource TransitionOSD configurationLanguageKeystoneGlobal Keystone:YesOutput: [Largest]Default Input BalanceBackMain Menu/ Installation / Display List / Display SettingsDisplay SettingsSwitch OFFDisplay InfoRenameIR Address 009DiagnosisBackCine VERSUM r01Display List1 CV50 On2 CV80 On3 CV120 OnBackDisplay SettingsSwitch OFFDisplay InfoRenameIR Address 009DiagnosisCW IndexOrientationTest patternsBackDisplay SettingsSwitch OFFDisplay InfoRenameIR Address 009DiagnosisOrientationTest patternsLensLampBackDisplay NameEnter new name- - - - - - - - - - - - - - - - - - - -Cine VERSUM 50 Cine VERSUM 80 Cine VERSUM 120Image 18-5Rename function searchHow to change the name of a displayWhen starting up the system for the first time, the name of the detected displays, registered in the display list, is the serial numberof the respective display. The name can contain maximum 20 characters. To change the name, follow next steps:1. Select the INSTALLATION menu using the respective keys on the Remote Control or the jog dial on the Cine VERSUM Master.(menu 18-10)2. Select item DISPLAY LIST by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.The Display List menu appears on-screen and in the graphical display showing the detected displays, inclusive address number,display name (can be renamed) and status. (menu 18-11)4. Select the display, you desire to change the name, by rotating the jog dial on the Master or the up/down arrow keys on the RemoteControl.5. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.The Display Settings menu for that particular display appears on-screen and in the graphical display showing the specific itemsfor the selected display (image 18-5).6. Select item RENAME by rotating the selection wheel on the Master or the up/down arrow keys on the Remote Control.7. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.The DISPLAY NAME menu appears on-screen and in the graphical display on the Master requesting to enter a new display name(max 20 characters). (menu 18-12)8. Start with filling in the new name, (Always 20 characters) as follows:- Pressing the cursor keys ← or → on the Remote Control or pressing the jog dial on the Master allows to select the characterposition.- Pressing the cursor keys ↑ or ↓ on the Remote Control or rotating the jog dial on the Master allows to change the character (Numeric characters can be entered remotely with the numeric keys).9. When the last character of the display name has been entered, a message box pops up, confirming saving data.The message box disappears after a few seconds. (menu 18-13)InstallationInput slotsFile serviceDisplay listInternal patternWhen no signalSource transitionOSD ConfigurationLanguageKeystoneGlobal keystone: YesOutput: [Largest]Default input balanceBackMenu 18-10Display List2 CV50 1: On3 CV50 2: Off (Stdby)4 CV80 1: On5 CV120 1: Off (Stdby)6 CV80 2: OnBackMenu 18-11Display NameEnter new name9:xxxxxxxxxxxxxxxxxxxx:OnBackMenu 18-12MessageSaving DataMenu 18-13R5976468 CINE VERSUM SYSTEM 03112003 133