13. Projection Stop (Standby or Economic Standby mode)13. PROJECTION STOP (STANDBY OR ECONOMICSTANDBY MODE)Overview• Projection Stop Using the Selection Wheel• Projection Stop Using the Remote ControlEconomic Standby for the Cine VERSUM Master only: in this mode, the power dissipation is reduced and thesystem stays operational for re-start of the system.13.1 Projection Stop Using the Selection WheelHow to stop image projection1. Press the jog dial on the Cine VERSUM Master. Scroll through the menu by rotating the jog dial until item ’Shutdown’ is pointed.(menu 13-1)2. Press the jog dial to confirm. The Master starts the shutdown process indicated in the graphical display with the message ’PowerDown’. At the end, the system returns to startup screen. (menu 13-2)The Master goes into standby mode and switches on its turn the linked displays into the standby mode (disabling image projec-tion).3. To switch the Cine VERSUM Master into the ’Economic Standby’, press the jog dial again. The graphical display indicates twoitems, ’POWER UP’ and ’ECONOMIC’. (menu 13-4)4. Scroll down in the menu by rotating the jog dial until item ’ECONOMIC’ is pointed (menu 13-4).5. Press the jog dial gain to confirm.The Cine VERSUM Master switches into the Economic mode, meaning into the lowest power dissipation. The lightning of thegraphical display is reduced to a minimum including the Zzzzz message. (menu 13-5)CineVERSUM Image SettingsAdvanced settingsInstallationService1 NO MODULE2 NO MODULE3 VIDEO [VIDEO]4 NO MODULE5 NO MODULE6 NO MODULE7 RGB-YUV [RGB]8 NO MODULE>Shutdown7 xga75_gs.c03 BackMenu 13-1Message >POWER DOWN7 xga75_gs.c03 _________Menu 13-2CineVERSUM >To enter the menuPress the buttonor use the RCU7 xga75_gs.c03 _________Menu 13-3CineVERSUM Master POWER UP>ECONOMICCineVERSUM _________Menu 13-4Message Zzzzzzzzz7 xga75_gs.c03 _________Menu 13-5R5976468 CINE VERSUM SYSTEM 03112003 85
