15. Module Address Read out/ChangeReading out the stored address using Display setting menu (exclusive Cine VERSUM Master)1. Using the jog dial on the Cine VERSUM Master or the Remote control keys, successively selects Main menu, Installation andDisplay list.The display list (On screen,menu 15-4; Graphical display, menu 15-3) sums up the linked displays. The display name is precededby its address number. The address number can also be find in the display settings menu of the respective display (continuewith step 2).2. Scroll through the display list until the display you desire to read out the address is highlighted (on screen) (menu 15-4) or pointed(graphical display) (menu 15-3).3. Press jog dial on Cine VERSUM Master or press ENTER on Remote Control to confirm.The display settings of the selected display appear in the on screen menu (menu 15-6) and in the graphical display (menu 15-5),inclusive the IR address number.Display List >2 CV50 1 On3 CV50 2 Stdby4 CV80 1 On5 CV120 1 Stdby6 CV80 2 On7 xga75_gs.c03 BackMenu 15-3Display List2 CV50 1: On3 CV50 2: Off (Stdby)4 CV80 1: On5 CV120 1: Off (Stdby)6 CV80 2: OnBackMenu 15-4Display Settings Switch OFFDisplay InfoRename>IR Address: 9Update SoftCW IndexOrientationProj_mode7 xga75_gs.c03 BackMenu 15-5Display settingsSwitch OFFDisplay InfoRenameUpdate SoftwareIR address: 9CW IndexOrientationProjector_modeBackMenu 15-6Reading out the stored address Cine VERSUM Master using Service menu1. Enter the GUI menu by pressing the jog dial on the Master or by pressing the ENTER key on the Remote Control.The main menu appears on-screen and in the graphical display on the Master. (menu 15-7)2. Select item SERVICE by rotating the jog dial on the Master or by pressing the ↑ and ↓ key on the Remote Control.The service menu opens including the item indicating the IR address of the Cine VERSUM Master. (menu 15-8)Cine VERSUM SystemImage SettingsAdvanced SettingsInstallationService1 NO MODULE2 NO MODULE3 VIDEO [VIDEO]4 NO MODULE5 NO MODULE6 NO MODULE7 RGB-YUV [RGB]8 NO MODULEShutdownBackMenu 15-7ServiceIdentificationPasswordIR Address 001Common Address 000Serial CommunicationI2C DiagnosisBackMenu 15-815.2.2 Changing the stored addressesExample of address settingTo be able to control separately the displays by means of the Remote Control (e.g. operation and standby mode), an unique addresshas to be stored for each display separately.94 R5976468 CINE VERSUM SYSTEM 03112003
