18. Additional settings Cine VERSUM Master18.4 Source TransitionSource transitionSeamless transition mode can be applied during input source switching. There is a choice between 14 different effects which renderthe transitions more enjoyable.How to enter the source transition effect1. Select the INSTALLATION menu (see "Loading a File", page 97)2. Select item SOURCE TRANSITION by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.The sub menu SOURCE TRANSITION appears on-screen and in the graphical display, including a list of available source tran-sition effects. The already active transition effect is indicated with a asterisk placed in front of the name. (menu 18-4)4. Select the transition effect you desire to apply by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.5. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.Confirmation is indicated with a asterisk placed in front of the new selected source transition effect.6. Press EXIT on the Remote Control to return or select BACK in the menu by rotating the jog dial on the Master or the ↑ or ↓ keyson the Remote Control, confirmed by pressing the jog dial or the ENTER key.Source transitionNoneFadeWipe RightWipe Down*SplitBoxCheckerboard (1)More..BackMenu 18-4Source transitionCheckerboard (2)WormClockWormsDiagonalWobbleSlideRandomMore..BackMenu 18-518.5 On Screen Display ConfigurationOverview• About the OSD (Menu, Bar Scale and Message)• Status Change of the OSD• On Screen Display Position Alignment18.5.1 About the OSD (Menu, Bar Scale and Message)OSD switching On/OffTo allow image adjustments during a performance without disturbing the image by the OSD, the On Screen Display can be turnedoff in 2 ways:130 R5976468 CINE VERSUM SYSTEM 03112003
