9424200994 Rev N 207Name DescriptionS Demand Apparent power (VA) demand maximum exceededSetting Change Setting change made by userSettings Group 0 Setting group 0 is activeSettings Group 1 Setting group 1 is activeSettings Group 2 Setting group 2 is activeSettings Group 3 Setting group 3 is activeSGC Active Active setting group changedSGC Logic Override Setting group control was overridden by logicTrip Coil Monitor Monitored trip circuit openuP Reset Alarm Microprocessor watchdog circuit timed outVar Negative Demand Negative var demand maximum exceededVar Positive Demand Positive var demand maximum exceededWatt Forward Demand Forward watt demand maximum exceededWatt Reverse Demand Reverse watt demand maximum exceededAlarm SettingsBESTCOMSPlus Navigation Path: Settings Explorer, Alarm Configuration, AlarmsHMI Navigation Path: Not available through the front panelAlarms are enabled using BESTCOMSPlus. Use the Settings Explorer to open the Alarm Configuration,Alarms tree branch. Configure alarms by selecting Disabled, Latching, or Non-Latching from the Minor,Major, and Logic drop-down menus next to the alarms. Refer to Figure 143.Figure 143. Alarm Settings ScreenUser Programmable AlarmsBESTCOMSPlus Navigation Path: Settings Explorer, Alarm Configuration, User Programmable AlarmsHMI Navigation Path: Not available through the front panelSixteen user programmable alarms are available. BESTlogicPlus Programmable Logic is used to set upalarm logic. User alarm labels are programmed on the User Programmable Alarms screen (Figure 144)BE1-11g Alarms
