526 9424200994 Rev NOutput Test (25A Voltage Monitor)Step 1: With no voltage applied to either the Line or Auxiliary voltage sources, OUT7 should be closed.This verifies the DEAD-LINE, DEAD AUX output of 25 Voltage Monitor.Step 2: Increase the Line VTP voltage above the DEAD-LINE setting and verify that OUT7 opens.Continue increasing voltage until OUT7 closes when the LIVE-LINE setting is exceeded. Thisverifies the LIVE-LINE, DEAD-AUX output of 25A Voltage Monitor. Remove voltage source 1.Step 3: Increase the Auxiliary VTX voltage above the DEAD-LINE setting and verify that OUT7 opens.Continue increasing voltage until OUT7 closes when the LIVE-LINE setting is exceeded. Thisverifies the DEAD-LINE, LIVE-AUX output of 25A Voltage Monitor.Step 4: (Optional.) Repeat Steps 1 through 3 for Settings Group 1, 2, and 3.Voltage Monitor Functional Test ReportVTP and VTX Live Voltage, Dead Voltage Pickup Test (25A Voltage Monitor)Accuracy = ±2%Step Setting Low Actual High Pass/Fail6 VTP - Dead V Dropout - 55.0 V 53.9 V 56.1 V P / F7 VTP - Live V Pickup - 90.0 V 89.2 V 91.8 V P / F9 VTX - Dead V Dropout - 55.0 V 53.9 V 56.1 V P / F10 VTX - Live V Pickup - 90.0 V 89.2 V 91.8 V P / FLive/Dead Dropout Timing Verification (25A Voltage Monitor)Accuracy = ±0.5% or ±2 cycles, whichever is greaterStep Dropout Delay Setting Low Actual Timing High Pass/Fail4 VTP - Dead V Dropout Delay - 50 ms 18 ms 82 ms P / F5 VTP - Live V Dropout Delay - 50 ms 18 ms 82 ms P / F6 VTP - Dead V Dropout Delay - 2,000 ms 1,968 ms 2,032 ms P / F6 VTP - Live V Dropout Delay - 2,000 ms 1,968 ms 2,032 ms P / F6 VTP - Dead V Dropout Delay - 5,000 ms 4,968 ms 5,032 ms P / F6 VTP - Live V Dropout Delay - 5,000 ms 4,968 ms 5,032 ms P / F7 VTX - Dead V Dropout Delay - 50 ms 18 ms 82 ms P / F7 VTX - Live V Dropout Delay - 50 ms 18 ms 82 ms P / F7 VTX - Dead V Dropout Delay - 2,000 ms 1,968 ms 2,032 ms P / F7 VTX - Live V Dropout Delay - 2,000 ms 1,968 ms 2,032 ms P / F7 VTX - Dead V Dropout Delay - 5,000 ms 4,968 ms 5,032 ms P / F7 VTX - Live V Dropout Delay - 5,000 ms 4,968 ms 5,032 ms P / FSynchronizer (25A) Test BE1-11g
