208 9424200994 Rev Nunder Alarm Configuration. When active, the label of a user alarm is displayed on the Alarms screen onthe front-panel display and in the fault report and/or sequence of events report.Figure 144. User Programmable Alarms ScreenRetrieving Alarm InformationBESTCOMSPlus Navigation Path: Metering Explorer, Status, AlarmsHMI Navigation Path: Metering Explorer, Status, AlarmsMajor and Minor alarms can be viewed through BESTCOMSPlus, the front-panel display and LEDindicators, and the web page interface. Alarms are displayed in the fault reports and sequence of eventsreports.To view alarms at the front-panel display, navigate to Metering > Status > Alarms. All active alarms will beshown on this screen. The front-panel navigation keys can be used to scroll through the list of activealarms.To view alarm status using BESTCOMSPlus, use the Metering Explorer to open the Status, Alarmsscreen shown in Figure 145. Alarms can be reset by clicking the Reset Alarms button under theappropriate column.Figure 145. Alarms ScreenResetting AlarmsA BESTlogicPlus expression can be used to reset the alarms. Use the Settings Explorer withinBESTCOMSPlus to open the BESTlogicPlus Programmable Logic tree branch. Select the Major AlarmReset, Minor Alarm Reset, or Logic Alarm Reset logic block from the list of Elements. The Major AlarmReset will reset all major alarms. The Minor Alarm Reset will reset all minor alarms. The Logic AlarmAlarms BE1-11g
