Baumer O200 Instruction Manual

Also see for O200: Quick start guide

en_BA_O200_IO-Link_V1.docx 20/34 Baumer Electric AG15.08.2018/ Frauenfeld, Switzerland4.4 Signal Processing4.4.1 Measurement Mode (Only O200.G, S)With this parameter pre-defined modes can be selected to achieve optimal results without much trial anderror.Parameter name Short Description Rights Unit / Allowed valuesMeasurement Mode Choose measurement mode fordifferent applicationsrw - High Speed- Standard- High PowerHigh Speed:Ideal for fast moving objects. Sensors is adjusted for fastest response time. Detection ability identical toStandard-Mode but with reduced ambient light immunityStandard:Standard setting with outstanding performance with the highest ambient light immunity.High Power:Twice the excess gain compared to Standard mode but with slower response time.Reduced hysteresis due to better signal/noise ratio.4.5 Input/Output Settings4.5.1 Switching OutputParameter name Short Description Rights Unit / Allowed valuesDI/DO Settings.OUT1 Circuit Selection of circuit type rw - PushPull (default)DI/DO Settings.OUT1 Mode Selection of output source(Default: SSC1)rw - None (SIOdeactivated)- SSC1 (default)- SSC4