129SettingsCalling up the system settings Press . Turn the rotary control/push buttoncounter clockwise until Trrvt appears at the top right of thedisplay. Press the rotary control/push button. Turn the rotary control/push buttonto select one of the following options:6qv,@r
hyqrvpr,9vyhi
vtur,9hvtuqrvt,Srrspv,9v
rpvs
h
hph
or8ypx Confirm your selection by pressingthe rotary control/push button .AudioThe Audio section includes systemsettings for audio mode.GAL (speed dependent volume)GAL is a control circuit on the TrafficPro. This control circuit automaticallyincreases the volume of the Traffic Prodepending on the speed of the vehicle.You can define the extent to which thevolume should be increased dependingon the speed of the vehicle here. Select 6qv in the system settings. Select Trrqqrrqryr. Turn the rotary control/push buttonto select the required value.Settings for left-hand/ right-handdrive vehiclesNavigation announcements andtelephone calls/ voice modeannouncements are transmitted viadifferent loudspeakers. Using thisfunction you can specify whether yourcar is a left-hand drive or right-handdrive vehicle and therefore set thetransmission accordingly. Select 6qv in the system settings. Select Dhyyhvvvsvp
ur. Select between Svtupr
r and Grspr
r (on = ).701470157016Note:A setting of “0” indicates no increase involume.A setting of “10” indicates the maximumincrease in volume.7052
