57Navigation mode• 8h
This is the default setting. It offerssufficiently accurate calculation of theETA for most drivers.• WhThis setting indicates to the Traffic Prothat you will need a little longer for theplanned route. This setting could beselected, for example, for a slowervehicle or in dense traffic areas.• Trs
rrySelect this option to modify the calcu-lation of the ETA to suit your require-ments. Turn the rotary control/push buttonto activate the required setting ( ).If Trs
rry is selected, you still need toselect the required setting. The availablerange is between 50% and 200%.A value of 100% indicates the 8h
set-ting. A later ETA will be calculated if ahigher percentage value is selected. Turn the rotary control/push buttonto set the required percentage value. Confirm your selection by pressingthe rotary control/push button .Measuring unitYou can convert the calculation of thedistances from metric (display in metresand kilometres) to imperial (display inyards and miles) system and vice versa. In the Settings menu, select the Vvsrh
r entry. Confirm your selection by pressingthe rotary control/push button . Select Hr
vp or Dr
vhy (on = ).Note:Only one of the two settings may beactive ( ) at the same time.2093Note:Only one of the two settings may beactive ( ).20942095
