33Navigation mode Confirm your selection by pressingthe rotary control/push button .A list of junctions appears. Turn the rotary control/push buttonand then press the rotary control/pushbutton to select the required junction.Setting the route optionsYou can use the route options to specifyhow the Traffic Pro calculates the routeto the destination. In the Enter Destination menu,depending on the previous setting,select Sr) u
, Sr) sh or Sr)qhvp.Confirm your selection by pressing therotary control/push button .The Route Options menu appears. Turn the rotary control/push buttonto select one of the following options:9hvp
r,Rvpx
r,Tu
r,6vq
h,6vqry,6vqyy,6vqsr
orSrhq Turn the rotary control/push buttonto switch the required function on ( )or off ( ).• 9hvp
rThe route is calculated taking intoaccount the traffic announcementsreceived.If dynamic route guidance is active,the routes are calculated on the basisof the fastest route to the destination.NoteIf the destination road entered crossesmore than 9 roads, a data entry menucorresponding to the data entry menufor roads appears.2023202420252026Note:Only one of the three settings (9hvp
r, Rvpx
r or Tu
r) may beactive ( ) at the same time.
