Chapter 5: Local Management5-482E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide5.15 HIGH SPEED INTERFACE CONFIGURATIONSCREENThe High Speed Interface Configuration screen displays the types ofinterfaces installed in ports 25 and 26, their current operating mode, andindicates if the ports are linked. This screen also allows the user to enableor disable Auto-Negotiation and set the Advertised Ability.To access the High Speed Interface Configuration screen from the HighSpeed Interface Configuration Menu screen, use the arrow keys tohighlight the FAST ETHERNET INTERFACES menu item and pressENTER. The High Speed Interface Configuration screen displays.Figure 5-22 High Speed Interface Configuration ScreenNOTEThe High Speed Interface Configuration screen, Figure 5-22,applies only to ports 25 and 26. This screen supports theFE-100TX, FE-100FX, and FE-100F3 Fast Ethernet InterfaceModules that operate at 100 Mbps.Firmware Revision: XX.XX.XXHigh Speed Interface Configuration19601-24Device Type: 2E42-27BOOTPROM Revision: XX.XX.XXPort 25FE-100TXLink100Base-TXFD[Auto-Negotiation][100Base-TXFD] [Disabled]RETURN2E42-27 LOCAL MANAGEMENTEvent Message LineSAVEPort TypeLink StatusCurrent Oper. ModeDesired Oper. ModeAdvertised AbilityPort 26UnknownN/A[N/A][N/A][N/A]EXIT
